21
1. The first character position is underlined, so turn the VALUE
dial to select the first character of the desired name.
2. Press
4
to move the underline to the next character’s
position, and then turn the VALUE dial to select the name’s
second character.
3. Repeat Step 2 to enter the remaining characters of the
song name.
As you name the song, you can press F1 (Change Type) repeatedly to
jump between upper-case, lower-case and numeric characters. Press F2
(Delete) to remove the character at the underline’s current location. Press
F3 (Insert) to insert a blank space for selecting a new character at the
underline’s current location.
4. When you’ve finished assigning the song an onboard
name, press F8 (Write).
Navigating a Song with Locate Positions
You can use the Fantom-X’s Locate feature to bookmark four
places in a song. Jump immediately to any of these four “locate
positions” using sequencer button shortcuts or the Locate
window’s Jump buttons.
Setting Locate Positions
1. On the Song Edit screen, press F5 (Loop/Locate).
2. Press F2 (Locate) to display the Locate window.
The four
Locate points
The bar at the top of the Locate window graphically shows the
placement of your locate positions once they’ve been set.
Setting Locate Positions Using the VALUE Dial
1. In the Locate window, use
3
and/or
4
to highlight the
bar and beat value for each locate position you want to
set, and turn the VALUE dial to select the desired bar and/
or beat.
2. Press F8 (Close) when you’re done.
Setting Locate Positions Using the Set 1-4 Buttons
You can set locate positions from the Locate window when the
song is stopped, or when it’s playing.
1. In the Locate window, press F7 (Set) so it lights red—the
Jump 1-4 buttons change to Set 1-4 buttons.
2. Move to a location in the song at which you want to place
a locate position using RESET, BWD or FWD, or by playing
the song until you reach the desired location.
3. Press the Set 1-4 button you want to associate with
this location—the locate position is placed. The Set 1-4
buttons change back into Jump 1-4 buttons.
4. To place another locate position, press F7 (Set) to display
the Set buttons again.
5. Move to the next location, and then press the desired Set
button.
6. To place additional locate positions, repeat Steps 4 and 5.
