- 39 -
Speakers do not produce sound when the
keyboard is played.
1. Check if the master volume is set too low.
2. Check if the R1/R2/L1 sound volume is set too low in the mixer in the
function menu.
3. Check if headphones are plugged into the PHONES jack.
The speakers produce noise when a
mobile phone is put near them.
Using a mobile phone in close proximity to the instrument may produce
interference. To prevent this, turn off the mobile phone or use it farther
away from the instrument.
The auto accompaniment does not play
back even when sync start is engaged
and a key is pressed.
You may be playing keys in the right hand range of the keyboard. To start
the accompaniment with sync start, make sure to play keys in the
left-hand range.
Certain notes seem to be in the wrong
pitch.
Make sure that the tune value is set to 0. Hold down the [EXIT] and
[ENTER] buttons and turn on the power to restore factory settings.
When connecting to computer, the
instrument cannot be recognized.
Check if the USB cable is firmly connected. Try connecting another
USB port on the computer. This instrument is plug and play and should
work without installing a driver.
The pedal does not respond.
Check if the pedal cable is firmly connected.
When using a sustain pedal, it doesn’t
sustain the notes when the pedal is
pressed, but it sustain the notes when the
pedal is released.
The polarity of different pedals may vary. If the connected sustain pedal
works in reversed behavior, please plug the pedal to the PEDAL jack
before turning the power on.
It cannot read/save to the USB flash
drive.
Make sure your USB flash drive is in FAT32 format and not
multi-partitioned.
It shuts down after a period of time.
The Auto Off function will turn off the instrument after a preset period of
time when the instrument is not in use. You can disable this function in the
function menu.
Specifications
Keyboard
61 keys with touch response
Display
Multi-functional LCD
Max polyphony
256
Tone
707
Style
300 p 30 users
Demo song
1
Layer
L, R1, R2
Split
Yes
