- 11 -
Notes:
1. Please connect the plug of the pedal to the PEDAL jack before turning the power on.
2. The polarity of different pedals may vary. If the connected sustain pedal works in reversed behavior, please plug the
pedal to the PEDAL jack before turning the power on
.
Connecting an Audio Equipment
The rear-panel OUTPUT jacks deliver the output of the instrument to
external audio equipment such as a keyboard amplifier, a stereo
sound system, a mixing console, or a tape recorder. Use an audio
cable to connect the OUTPUT jacks of the instrument to the AUX IN
jack of the external audio equipment.
Use the R and L / MONO jacks for stereo output or just the L / MONO
jack for mono output.
Note:
To avoid damaging the speakers, please set the volume level to minimum before connecting to power and other
devices.
Connecting a Microphone
Before connecting or disconnecting a microphone, please set the
master volume to minimum level.
Plug a microphone into the MIC INPUT jack, then adjust the master
volume to an appropriate level.
Note:
Please unplug the microphone when it is not used.
Power / Master Volume
Turning the Power On / Off
1.
Make sure the instrument is properly
connected to power supply.
2.
Press the [POWER] switch, the LCD screen turns on, indicating the instrument is powered on.
3.
If you are ready to turn off the instrument, press and hold the [POWER] switch again.
Notes:
