44
Instruction
Format
Parameter
Range ({ } is default)
Explanation
Handshake Instructions
ESC .B
[ESC].B
None
Outputs the current remaining buffer
Output Remaining
capacity.
Buffer Capacity
ESC .M
[ESC].M<P1>;<P2>;
P1: Delay time
0—32767 (msec) {0 (msec)}
Sets handshake output specifications.
Set Handshake
<P3>;<P4>;<P5>;<P6>: P2: Output trigger character
{0 (Sets nothing)}
Output
P3: Echo terminator
{0 (Sets nothing)}
Note: When you specify some
Specifications (1)
P4: Output terminator
{13 ([CR])}
values to <P4> and <P5>, always
P5: Output terminator
{0}
set 0 to <P6>. When you specify some
P6: Output initiator
{0 (Sets nothing)}
value to <P6>, always set 0 to <P5>.
ESC .N
[ESC].N<P1>;<P2>;
P1: Intercharacter delay
0—32767 (msec) {0 (msec)}
Sets an intercharacter delay, and also
Set Handshake
<P3>;•••••;<P11>:
P2—P11: Xoff character
{All 0 (Sets nothing)}
an Xoff character for performing the
Output
(for Xon/Xoff)
Xon/Xoff handshake.
Specifications (2)
Immediate response
character (for ENQ/ACK)
ESC .H
[ESC].H<P1>;<P2>;
P1: The number of bytes for
0—15358 (byte) {80 (byte)}
When receiving the ENQ character set
Sets ENQ/ACK
<P3>;••••••••;<P12>:
data block
{0 (Sets nothing)}
by <P2>,compares the value set by
Handshake Mode1
P2: ENQ character
{All 0 (Sets nothing)}
<P1> and the remaining buffer
P3—P12
capacity, and returns the ACK character
: ACK character (only when
to the host computer when the
<P2> is set)
remaining buffer capacity is larger.
The [ESC].H with no parameter
performs a dummy handshake.
ESC .I
[ESC].I<P1>;<P2>;
P1: Limit of the remaining
0—15358 (byte) {80 (byte)}
Used for performing the Xon/Xoff
Set Xon/Xoff
<P3> ;••••••••;<P12>:
buffer capacity (for Xon/Xoff)
handshake and the ENQ/ACK
Handshake and
The number of data block bytes
handshake mode 2. The [ESC].I
ENQ/ACK Handshake
(for ENQ/ACK (mode2))
instruction with no parameter performs
Mode2
P2: ENQ character
{0 (Sets nothing)}
a dummy handshake. In a dummy
(for ENQ/ACK (mode2))
handshake, always returns the ACK
0 (for Xon/Xoff)
character to the host computer,
P3—P12
{All 0 (Sets nothing)}
regardless of the remaining buffer
: Xon character
capacity, when receiving the ENQ
(for Xon/Xoff)
character.
ACK character
(for ENQ/ACK (mode2))
ESC .P
[ESC].Pn:
n : Handshake type
0—3 {0}
Sets the type of handshake used.
Select Handshake
The types of handshakes corresponding
to the parameters 0 to 3 and the setting
combinations of their equivalent device
control instructions are as follows:
n
Hand-
Equivalent device
shake
control instruction
0 ENQ/ACK [ESC].I: [ESC].M: [ESC].N:
(dummy)
[ESC].@:
1
Xon/Xoff
[ESC].I80;;17:
[ESC].M50;;10;13:
[ESC].N10;19: [ESC].@;0:
2 ENQ/ACK [ESC].I80;5;6:
[ESC].M;17;10;13:
(mode 2)
[ESC].N: [ESC].@;0:
3
Hardwire
[ESC].I: [ESC].M: [ESC].N:
[ESC].@;1:
Summary of Contents for DPX-2700A
Page 1: ...USER S MANUAL DRAFTINGPLOTTER DPX 3700A DPX 2700A ...
Page 10: ...viii MEMO ...
Page 59: ...R8 991012 ...
