Roland DPX-2700A User Manual Download

Page: 34 / 59

Display menu

Explanation

Remarks

Factory default

•

Submenu

Choosing this moves to the submenu.

—

SuperFine

Set this to ON when using a 0.13 mm or 0.18 mm [*SuperFine] is displayed when this has been

OFF

♦

ink pen.

selected.

Top

Choosing this returns to the top menu.

—

VectorSort

When ON is setting, this collects similarly located [VectorSort*] is displayed when this has been

◊

line data and sorts it. Plotting time is shortened by selected.

eliminating wasted pen movement.

WaitingTime

When data has not been received for more than ten

Refer to “Replotting” on page 8 for further details.

♦

seconds, this function judges that the data for

plotting one complete page has been received.

X-Axis

When plotting in alignment with a grid, such as

For further details, refer to “Correcting the

—

when plotting on section film, this sets the X-axis distance” on pages 28 and 32.

distance from the base point.

X-Point

This aligns the coordinate axis in the X-axis

Maximum rotation is five degrees.

—

direction during plotting with the coordinate axis

For further details, refer to “Setting the X

in the X-axis direction of the loaded sheet.

correction point” on pages 27 and 31.

This can be used to make adjustment when the

loaded sheet is not perfectly straight, or when the

grid markings of a section film or the like are

slightly uneven because of shrinkage or expansion

of the material.

Y-Axis

When plotting in alignment with a grid, such as

For further details, refer to “Correcting the

—

when plotting on section film, this sets the Y-axis distance” on pages 28 and 32.

distance from the base point.

Y-Point

This aligns the coordinate axis in the Y-axis

Maximum rotation is five degrees.

—

direction during plotting with the coordinate axis

For further details, refer to “Setting the Y

in the Y-axis direction of the loaded sheet.

correction point” on pages 27 and 31.

This can be used to make adjustment when the

loaded sheet is not perfectly straight, or when the

grid markings of a section film or the like are

slightly uneven because of shrinkage or expansion

of the material.

A plus sign (*) is displayed when the menu for setting only ON/OFF is set to ON.

Summary of Contents for DPX-2700A




























































Search results

Summary of Contents for DPX-2700A

Reviews:

Related manuals for DPX-2700A

Brands by name

Popular brands

Roland DPX-2700A, User Manual

Search results

Summary of Contents for DPX-2700A

Reviews:

Related manuals for DPX-2700A

Brands by name

Popular brands