Roland DPX-2700A, User Manual

Page: 22 / 59

12
Black Brown Red Yellow Green Blue Violet Magenta
Dark Brown Mahogany Poppy Red
Golden Yellow
Forest Green Cobalt Blue Dark Purple Purple
Grey Pine Orange Lime Green Kelly Green Sky Blue Mauve Rose Pink
Warm Grey Beige Peach Lemmon Lime Olive Green Ice Blue Turquoise Pale Pink
Features
Thick water-based fiber tipped pen draws a 2 mm thick line
Comes in eight colors (black, red, blue, green, orange, pink,
brown, purple)
Optimum for advertising and illustration, because large areas can
be colored quickly
Features
Variety of colors and shades for colorful expression
Optimum for illustrations, graphs and graphics
Fiber pen tip for simple use
Two pen tip thicknesses - 0.3 mm and 0.6 mm
Following pen colors available:
house.
Pen cap rubber
orientation
Plotting distance
(with our standard paper)
0.3 mm: 400 m (1300')
0.6 mm: 300 m (900')
50 cm/sec
35 gf
Pen speed (maximum value)
Pen force (maximum value)
32 Color Plotter Pens
Long-term use will cause the pen tip to wear, causing a gradual increase in line width.
Because these are dye-based inks, plots made with these pens will fade if left exposed to sunlight for long
periods. Store plots made using these pens out of direct sunlight.
For drawing of even higher quality, set the pen speed to 10 cm/sec.
Water Based Fiber Tipped Pen Pen cap rubber
orientation
Plotting distance
(with our standard paper)
0.3 mm: 400 m (1300')
0.6 mm: 300 m (900')
50 cm/sec Pen speed (maximum value)
35 gf
Pen force (maximum value)
Features
Excellent coloration for colorful illustrations
Comes in eight colors (black, red, blue, green, brown, purple,
pink, orange), and two pen tip thicknesses (0.3 mm and 0.6
mm)
Long-term use will cause the pen tip to wear, causing a gradual increase in line width.
Because these are dye-based inks, plots made with these pens will fade if left exposed to sunlight for long
periods. Store plots made using these pens out of direct sunlight.
For drawing of even higher quality, set the pen speed to 10 cm/sec.
Thick Water Based Fiber Pen Pen cap rubber
orientation
Plotting distance
(with our standard paper)
2 mm: 100 m (300')
100 gf Pen force (maximum value)
Pen speed (maximum value) 50 cm/sec
Performance may not be satisfactory where uniform line thickness is essential, or when ink is low. In this case,
set pen speed at 15 cm/sec and pen force at 95 gf to 110 gf.
Because these are dye-based inks, plots made with these pens will fade if left exposed to sunlight for long
periods. Store plots made using these pens out of direct sunlight.