8
Panel Descriptions
Rear Panel (Connecting Your Equipment)
MIDI device
Powered speaker, amp
Microphone
Computer
1
2
3
4
5
To prevent malfunction and equipment failure, always turn down the volume, and turn off all the
units before making any connections.
Front Panel
Headphones
1
1
[PHONES] jacks
Connect headphones here.
1
PC port
Use the included USB cable to connect this port to your computer.
When this is connected, power is supplied from the computer.
To connect this to your computer, you must install the USB driver.
&
“Installing the Software” (p. 3)
2
MIDI OUT connector
This outputs MIDI messages such as MIDI clock.
3
MASTER OUT L, R jacks
Connect your powered speakers or power amp here.
4
MIC IN jack
Connect your microphone here.
MEMO
In “System Settings” (p. 15), you can specify dedicated effects (reverb,
delay) for the mic input.
5
[MIC SENS] knob
Adjusts the mic input sensitivity.
