10
Using Serato DJ Intro
Playing a Song
1
Set the DJ-202’s knobs and switches as follows.
[MASTER LEVEL] knob
Turned all the way to the left
[TRIM] knobs
Center
[HI], [MID], [LOW] knobs
[FILTER] knobs
Channel faders
Lowest position
2
Press the [
r
] button to play back the loaded song.
3
Move the channel fader upward and turn the [TRIM] knob
toward the right to adjust the volume.
Adjust the volume so that the channel level indicator is lit as far as the
orange portion.
4
Turn the [MASTER LEVEL] knob toward the right to adjust the
level of the speakers.
Monitoring Through Headphones
1
Set the DJ-202’s knobs as follows.
[MIXING] knob
Turned all the way to the left
[PHONES LEVEL] knob
2
Press the channel [CUE] button of the channel that you want to
monitor.
3
Turn the [PHONES LEVEL] knob toward the right to adjust the
headphone level.
Closing Serato DJ Intro
1
Close the Serato DJ Intro screen.
Mac OS
In the upper left of the Serato DJ Intro screen, click the [
6
] (red: close)
button.
Windows
In the upper right of the Serato DJ Intro screen, click the [X] button.
A confirmation screen appears.
2
Click [Yes] to close Serato DJ Intro.
3
Turn off the power of the equipment that’s connected to the
DJ-202.
4
Disconnect the USB cable to power-off the DJ-202.
