Roland Color Camm Pro PC-60, Service Notes

Page: 98 / 100

94
7 Supplement
7
7-2 USER'S DIP SW SETTING
Following table describes the settings of the DIP SW located at the right side of the machine.
Bit#9 and bit#10 are not announced to the end users.
NORMAL MODE
ECONOMY MODE
MAGENTA
MAGENTA
CYAN
CYAN
HEAD is down and RIBBON is
winded only at CYAN part.
HEAD is down and RIBBON is winded all the time.
Ribbon can be saved.
DIP SW Function OFF ON
SW-1 RS-232C Baud rate 9600 19200
SW-2 RS-232C Parity Disable Enable
SW-3 RS-232 Parity ODD EVEN
SW-4 RS-232C Handshake Hardwire XON/XOFF
SW-5 RS-422 Baud rate 57.6K 115.2K
SW-6 Front edge sense Disable Enable
SW-7 Blade offset 0.25 mm 0.5 mm
SW-8 Prefeed mode Enable Disable
SW-9 Ribbon economy mode Normal Ribbon economy
SW-10 Auto Power Off function Enable Disable
RIBBON ECONOMY MODE
Ribbon Economy Mode is explained by explaining the way of printing CYAN part of the following figure.
Normally, HEAD will be in DOWN position and the RIBBON will be winded from the beginning to the end of 1
BAND.
When selecting Ribbon Economy Mode, CYAN RIBBON won't be winded at the right margin of MAGENTA part,
and the HEAD will be DOWN only at the CYAN part for printing. However, ribbon will be winded at the left part of
MAGENTA part.
ROLAND DG CORPORATION does not guarantee the quality of the printing using the Ribbon
Economy Mode.
The starting point of the printing could be shifted in each BAND.