71
4 Adjustment
4
3
4
Select CMYK SENSING CHECK.
Selection can be done by [SHEET TYPE] key.
[PIECE] LED blinks : CARTRIDGE EXCHANGE
TEST
[ROLL] LED blinks : CMYK SENSRING CHECK
2
For selection
To enter
Turn on the MAIN POWER SW while pressing [POWER],
[SHEET TYPE] and [BASE POINT] keys and enter the
FACTORY MODE.
Select [CARTRIDGE HOLDER 6] with [
] or [
] keys
and press [SHEET TYPE] key to enter the CARTRIDGE
POSITION ADJUSTMENT MODE.
Make sure that it is in the TEST MODE.
During the TEST MODE, [POWER] LED will be ON and
either [PIECE] or [ROLL] LED will blink.
If not, press the [POWER] key to enter the MODE.
5
Put CMYK ribbon in the CARTRIDGE HOLDER and close
the FRONT COVER.
PC60 starts performing CARTRIDGE EXCHANGE in order
of CMYK.
Summary of Contents for Color Camm Pro PC-60
Page 4: ... MEMO ...
Page 6: ...2 1 Structure Spare Parts 1 1 2 FRAME 1 ...
Page 8: ...4 1 Structure Spare Parts 1 1 3 FRAME 2 ...
Page 88: ...84 4 Adjustment 4 MEMO ...
