8
USING YOUR JUICER
1. Before attaching the power cord into the outlet, make sure the power switch is in the “
O
”
position, the power switch has three settings: “
I
” indicates “ON”, press the power switch to
“
I
” position to activate the motor and start making juice; “
O
” indicates “OFF” position,
press the power switch to “
O
” position to turn off the machine; “
R
” means reverse rotation,
which is only used when something is stuck and you need to unclog.
2. Make sure the juice container and the residue container are placed in position.
3. Cut fruits and vegetables into smaller pieces. For example, the carrots shall be cut into
thin slices with size of 15mm
×
15mm before being put into the machine.
NOTE:
A) Please remove any hard seeds before juicing.
B) It is not recommended to process coconuts or similar hard foodstuffs, since this may
damage the motor.
C
)
It is not recommended to process hard fruit or vegetable rich in fiber and starch, such
as sugarcane.
D) The peel and pits should be removed from oranges, lemons, grapefruits and melons.
4. Drop the prepared fruits or vegetables into the hopper and gently push the fruit down
into the grinding head using the food pusher.
5. Connect the appliance to the power source, and then press the power switch to the “ON
”
position, the appliance starts to work. After few minutes, the juice flow out.
Caution: Do not turn the power switch from "I" to "R" or from "R" to "I" directly at
any time during operation. If required, firstly press the power switch to “O” position and
make the appliance stop running completely and then turn the power switch from "I" to
"R" or from "R" to "I" .