background image

 

 

accessories in warm soapy water and rinse them and dry. But never immerse motor unit in 

water for cleaning to prevent the risk of electric shock. 

 

NOTE: The strainer can be cleaned completely by the small cleaning brush.   

3. The correct assembly way will be described for details in below sections. 

Before assembling, be sure the power cord is unplugged from the power outlet and the 

power switch is on the “O” position. 

 

NOTES BEFORE USE 

1

  Prepare all the required materials according to the characteristics of them 

- Materials with hard fiber 

The materials with hard fiber shall be cut into slices 3~5cm in length and 1.5~2cm in 

thickness. 

- Leaf vegetables and materials with long & hard fiber (such as celery, wildcelery herb and 

collard etc.)   

Cut the stems of the materials into slices 3~5cm in length and then roll up the leaves of the 

materials well. 

- The fruit with hard core shall be pitted. The cores of peach, plum, mango, apricot and 

jujube shall not put into the hopper to avoid any malfunction. 

- The materials with thick or hard peel shall be peeled before being put into the juicer for 

processing. 

- The frozen materials can just be used after being defrosted. Never use ice. 

- Never process the materials with high vegetable oil or animal oil with this juicer to avoid 

Fig.1 

Summary of Contents for R-460













Reviews: