10
the refrigerator.
CLEANING AND MAINTENANCE
1. Unplug the appliance and wait it completely cool down before cleaning.
2. In order to detach & clean more easily, plug in and run the juicer without load for about
30 seconds after removing the residue. If the hopper cannot be detached easily, please
follow and repeat the following operation for two or three times: Reverse—OFF—ON, at
the same time, hold and rotate the hopper to detach it. After finish extracting juice, pour
some water into the hopper to clean it so that it will be easier to be detached.
Caution: Do not turn the power switch from "I" to "R" or from "R" to "I" directly at
any time during operation. If required, firstly press the power switch to “O” position and
make the appliance stop running completely and then turn the power switch from "I" to
"R" or from "R" to "I" .
3. Unlock the hopper by turning it in anti-clockwise and then remove it.
4. Detach the rotary cleaning brush, strainer and grinding head in sequence by following
the operation of “
FOR THE INITIAL USE
”.
5. Rotate the jar anticlockwise and then remove the jar.
6. Empty the residue container, and then clean the hopper, grinding head, strainer, rotary
cleaning brush, jar and residue container under running water. The small cleaning brush
can be used for the strainer for better cleaning.
Caution: Strainer is sharp, so handle carefully during cleaning
Caution: Do not use metal sponge to clean, it will damage the machine.
7. If you need to clean the residue outlet thoroughly, you shall firstly pull the buffer plate
out of the residue outlet and then clean it completely with the small cleaning brush.
8. Wipe the outside of motor unit with damp cloth. Never immerse the motor unit in water.
