Rohm KZS-H, Translation Of The Original Operating Manual

Page: 43 / 44

Storage | 8
KZS-H_KZS-HG 43 / 44
8 Storage
If the centric clamp is not in use, the centric clamp is to be stored in a dry,
protected place in accordance with the storage temperature (environmental
and operational conditions).
9 Troubleshooting
Fault Possible cause Measure
The centric clamp does
not go into clamping pos-
ition. Leakage on a hydraulic
line. Check hydraulic line.
The measured clamping
force decreases from
measurement to meas-
urement. Insufficient lubrication. Lubricate the centric
clamp.
Internal soiling. Complete cleaning (see
Complete Cleaning
[
} 40] ).
Defective seals. Replace seals (see re-
placement of wear parts
in
Complete Cleaning
[ } 40] ).