Rohm KZS-H, Translation Of The Original Operating Manual

Page: 12 / 44

2 | Safety
12 / 44 KZS-H_KZS-HG
2.4 Qualification of Operating and Specialist Personnel
Trained personnel
Trained personnel have been instructed in correct handling and possible
dangers when using the centric clamp. In particular, the personnel must have
been instructed in the safety equipment.
Qualified personnel
Personnel without experience of handling a centric clamp are exposed to in-
creased risks of injury in the event of incorrect conduct, especially during as-
sembly and maintenance work, due to the clamping movements and forces.
Therefore, the centric clamp may only be assembled, maintained and serviced
by persons who have received special training or instruction for this purpose
or who have extensive experience. The qualified personnel must be able to
read and understand the displays and to act accordingly. The qualified per-
sonnel must have read and understood this operating manual.
In particular, qualified personnel are:
▪ Mechanics
Work on the mechanical equipment may only be carried out by a trained
mechanic or by personnel under the direction and supervision of a trained
mechanic. Work on gas, pneumatic and hydraulic equipment may only be car-
ried out by mechanics trained for this purpose.
▪ Electricians
Work on the electrical equipment may only be carried out by a qualified elec-
trician or by personnel under the direction and supervision of a qualified elec-
trician in accordance with the electrical regulations.