5 | Assembly of the Centric Clamp
22 / 44
KZS-H_KZS-HG
5
Assembly of the Centric Clamp
WARNING
Injuries due to insufficient securing on assembly, incorrect
tightening torque of the screws.
Crushing due to falling of the centric clamp.
Ø
Use tapped holes for transport purposes.
Ø
Observe tightening torque of the screws.
Ø
Wear personal protective equipment.
WARNING
Crushing injuries and cuts due to start-up of the machine dur-
ing set-up work.
Flying parts may cause serious injuries.
Ø
Disconnect the power supply before assembly.
Ø
Protect the machine against being re-started.
Ø
Wear personal protective equipment.
5.1
Personal Protective Equipment and Personnel Qualification
When working on and with the centric clamp KZS-H/KZS-HG, personal pro-
tective equipment must be worn. The owner is responsible for providing per-
sonal protective equipment.
▪ Personal protective equipment must be in perfect condition when carrying
out work. Defective safety equipment is to be replaced immediately.
▪ Observe information on personal protective equipment posted in the work-
ing area.
▪ During
rotational operation
of the centric clamp KZS-H/KZS-HG,
no
pro-
tective gloves are to be worn! Hand protection is only to be worn during
transport, assembly and maintenance and as long as the centric clamp
KZS-H/KZS-HG is at a standstill.
Wear protective gloves
Wear safety goggles
Summary of Contents for KZS-H
Page 2: ......
