Rohm EXTRA-RV, Translation Of The Original Operating Manual

Page: 8 / 24

2 | Safety
8 / 24 Drill Chuck EXTRA -RV
2 Safety
Safety instructions and safety equipment serve to prevent accidents and
damage when working on the
drill chuck . The safety instructions contain
warnings and basic safety instructions. In addition to the safety instructions
in this chapter, the following chapters contain action-related warnings.
Maximum protection of personnel and the environment from dangers and
trouble-free operation is only possible when all safety instructions and
warnings in this operating manual are observed.
2.1 Intended Use
The drill chuckEXTRA-RV may only be operated with hand-held corded
drills and cordless drills with and without a spindle stop. To operate on a
machine without a spindle stop, a version with a holding ring is recommen-
ded.
Only suitable rotationally symmetric tools may be clamped in the drill chuck-
EXTRA-RV .
The permissible usage and environmental conditions must be observed
(
Technical data [ } 11]
).
2.2 Improper Use
If the drill chuck is operated for a purpose other than the intended use as
specified in this
Operating manual
, this is deemed to be improper use.
Any utilisation beyond the scope of the “intended use” poses risks and is
not approved by
RÖHM .
Improper use refers to the following:
▪
Use of the
drill chuck
to clamp unsuitable materials (compressible ma-
terials);
▪ Clamping and releasing the drill chuck with an aid.
▪ Use of the drill chuck with missing or damaged components.
▪
Use of the
drill chuck
as load-bearing equipment, workpiece chuck or
holding device, e.g. gripper;
▪ Loading of the drill chuck beyond the defined limits;
▪ rotation with the workpiece inserted but not clamped;
▪
clamping of rotating workpieces with a great imbalance;
▪ Assembly of the drill chuck and accessory parts with incorrect torque
(see Disassembly/assembly of the drill chuck [ } 13] ).
▪ Operation with modifications not approved by the manufacturer.