Disassembly/assembly of the drill chuck | 4
Drill Chuck EXTRA -RV
15 / 24
Assembling the drill chuck
§
Power supply disconnected (mains plug pulled/battery removed).
1.
Check the machine spindle and the new
drill chuck
for soiling and
clean, if necessary.
Ø
In case of damage at the machine spindle or the
drill chuck
, the
drill
chuck
must not be mounted.
2.
Screw the
drill chuck
onto the machine spindle (right-hand thread).
(Figure E, page 16)
3.
Clamp a torque wrench with hexagon socket adapter into the
drill
chuck
and tighten the
drill chuck
on the machine spindle (Figures F, G
page 16). Observe the permissible torque according to the machine
manufacturer.
4.
Open the clamping jaws of the
drill chuck
and remove the torque
wrench.
5.
If installed, insert and tighten the retaining screw (left-hand thread)
(Figure H, page 16). Observe the permissible torque according to the
machine manufacturer.
ü
drill chuck
mounted.
Summary of Contents for EXTRA-RV
Page 2: ......
