Disassembly/assembly of the drill chuck | 4
Drill Chuck EXTRA -RV
19 / 24
Assembling the drill chuck
§
Power supply disconnected (mains plug pulled/battery removed).
1.
Check the machine spindle and the
drill chuck
for contamination and
clean, if necessary.
Ø
In case of damage at the machine spindle or the
drill chuck
, the
drill
chuck
must not be mounted.
2.
Screw the
drill chuck
onto the machine spindle (right-hand thread) (Fig-
ure A, page 20).
3.
Hold the machine spindle with a spanner.
4.
Clamp a torque wrench with hexagon socket adapter into the
drill
chuck
(Figure B, page 20). Observe the permissible torque according
to the machine manufacturer.
5.
Open the clamping jaws of the
drill chuck
.
6.
If installed, insert and tighten the retaining screw (left-hand thread).
Observe the permissible torque according to the machine manufac-
turer (Figure C, page 20).
ü
drill chuck
mounted.
Summary of Contents for EXTRA-RV
Page 2: ......
