background image

About this Operating Manual | 1

Drill Chuck EXTRA -RV

5 / 24

be inappropriate. 

RÖHM

 is not liable for damage resulting from such use.

The risk is borne solely by the operator. Product liability for consequential
damage of any type is excluded for damage and operational interruptions
resulting from operating errors, failure to observe this 

Operating manual

 or

incorrect maintenance by unauthorised personnel.

All unauthorised conversions, modifications to the 

drill chuck

 and/or

changes in conditions are not permitted for safety reasons and exclude

RÖHM

 from any liability for any damage which may result. If modifications

to the 

drill chuck

 are necessary or the area of use differs from the intended

use, this must be agreed with the express permission of 

RÖHM

.

The statutory and contractually agreed terms and conditions apply.

The following damage or defects are excluded from the warranty:

caused by the operator due to non-compliance with the written instruc-
tions of 

RÖHM

 with regard to

commissioning (e.g. incorrect construction and assembly work),

operation and

maintenance of the equipment (insofar as this maintenance has not been
contractually taken over by 

RÖHM

).

caused by technical operating conditions unknown to 

RÖHM

 (e.g.

chemical or electrolytic influences) and/or machine specifications.

caused by natural wear.

caused by force majeure.

caused by incorrect operation of all types or by incorrect use or opera-
tion of the 

drill chuck

. This also includes loading beyond the specified

load limits (e.g. speed, pressure, force, etc.).

This also includes damage caused

if the operator or third parties carry out modifications or repairs to the
services / products without prior permission of 

RÖHM

. Excepted from

this are damage or defects which have occurred and which were
demonstrably not due to these modifications or repairs.

which occur due to use of the 

drill chuck

 under altered operating condi-

tions (e.g. materials, tools, cutting parameters, programs, etc.), in par-
ticular without consulting and obtaining written authorisation from the
seller or 

RÖHM

.

which are due to altered environmental conditions.

Summary of Contents for EXTRA-RV

























Reviews: