Product Description | 3
Drill Chuck EXTRA -RV
11 / 24
3
Product Description
3.1
About this drill chuck
The
drill chuck
EXTRA-RV
is a manually operated
drill chuck
for use with
hand-held corded drills and cordless drills with and without a spindle stop.
1
2
3
4
1
Disk
3
Clamping sleeve
2
Clamping jaws
4
Holding ring
For clamping/releasing, the clamping sleeve (3) is rotated in the direction
shown on the disk (1) or the clamping sleeve. For locking, the clamping
sleeve is rotated in the “ZU (CLOSED)” direction of rotation until further ro-
tation is no longer possible. The clamping jaws (2) fix the clamped tool in
place. In machines without a spindle stop, the holding ring (4) is used for
holding during clamping/releasing.
3.2
Technical data
Type
EXTRA-RV
Weight [g]
approx. 150 to 350
Clamping diameter [mm]
1 to 10 and 1.5 to 13
Interfaces to the machine spindle
9/16" – 18 UNF, 1/2" - 20 UNF, 3/8"
– 24 UNF
Service life
10,000 interlocking switching cycles
Dimensions and further information
See packaging/catalogue
Summary of Contents for EXTRA-RV
Page 2: ......
