Troubleshooting | 10
Power Chuck DURO-A
49 / 52
10
Troubleshooting
Fault
Possible cause
Measure
The power chuck runs
with an imbalance.
The jaws are not in the
same position.
Unbalanced workpiece
clamped.
Check jaw position and
correct if necessary.
Measure distance of the
jaws to the outer Ø.
Balance workpiece or
reduce speed.
The tensile force is not
reached.
The cylinder is incor-
rectly adjusted.
Check settings and cor-
rect if necessary.
The workpiece cannot
be inserted.
The workpiece diameter
is greater than the
clamping diameter of the
power chuck.
Use suitable top jaws or
power chuck.
Summary of Contents for DURO-A
Page 2: ......
