Rohm DURO-A, Translation Of The Original Operating Manual

Page: 32 / 52

5 | Assembly
32 / 52 Power Chuck DURO-A
12. Check the radial and axial run-out of the power chuck on the check col-
lar and align if necessary.
13. Tighten the three chuck holding screws (10) on the machine spindle
with the permissible tightening torque ( Checking the Tightness of
Screw Connections [ } 42] ).
14. Check for correct operation, see Checking the Device for Correct Op-
eration [
}
44] .
15. Check the jaw stroke, see Checking Jaw Stroke [
}
44] .
16. Check the clamping force, see Checking the Clamping Force [
}
44] .
17. Turn in the screw plug (17).
ü Power chuck is mounted on the machine spindle.