Assembly | 5
Power Chuck DURO-A
33 / 52
Disassembly/dismantling from the machine spindle
Disassembly or dismantling of the power chuck from the machine spindle is
carried out in reverse order.
For sizes 254-400
1.
Disassemble the protective bushing (5).
5
2.
Move the draw tube into the front position.
3.
Move the piston (3) of the power chuck into the front position (jaws in
"open" position).
4.
Undo the screw plug (17), if fitted, on the front of the power chuck and
remove.
17
5.
Press the chuck holding screws (10) inwards.
Summary of Contents for DURO-A
Page 2: ......
