Rohde & Schwarz ZVB 14 Service Manual Download Page 94

Page: 94 / 198

Instrument Construction and Function Description

R&S ZVB

1145.1078.82 3.26

E-4

Removing the lithium battery

Carefully lift up and pull out the battery.

Note:

Lithium battery 3.4 V (dia. 20 mm * 3 mm) R&S Item No. 0858.2049.00

Battery

LAN 1 LAN 2

Contact side of switching foil (keyboard) up

Connector for rotary pulse generator

CPU

Connector for display and
converter adapter board

Front Module Controller Typ FMR6

Fig. 3-4

Location of the lithium battery on the front module controller

Installing the new battery and reassembling the instrument

CAUTION

Never short circuit the battery

Insert the battery under the spring in the holder.

N.B.: The positive pole of the battery (+) must be uppermost.

Reinsert the front unit in the instrument and secure to the front frame with 4 countersunk screws
(610).

Refit the countersunk screws (176) (4), (177) (6 ), (178) (8).

CAUTION

Avoid trapping cables and ensure cabling is tidy

Replace the front cover (300 to 330) and screw in the countersunk screw (390).

Reconnect the 3.5 mm connection cables (only with option R&S ZVBx-B16)

Refit the 2 front handles (410) using 4 screws.

Summary of Contents for ZVB 14







































































































































































































Search results

Summary of Contents for ZVB 14

Reviews:

Brands by name

Popular brands

Rohde & Schwarz ZVB 14, Service Manual

Search results

Summary of Contents for ZVB 14

Reviews:

Brands by name

Popular brands