manualshive.com logo in svg

Rohde & Schwarz ZVB 14, Service Manual

Share
Download
Rohde & Schwarz ZVB 14 Service Manual Download Page 8

1171.0200.61-01 

2

Ordering Spare Parts 

To deliver spare parts promptly and correctly, we need the following information: 

●

  Stock number (see list of spare parts in chapter "Documents") 

●

 Designation 

●

  Component number according to list of spare parts 

●

  Number of pieces 

●

  Instrument type for which the spare part is needed 

●

  Instrument stock number 

●

  Instrument serial number 

●

  Contact person for possible questions 

Refurbished Modules 

Refurbished modules are an economical alternative to original modules. Bear in mind that refurbished 
modules are not new, but repaired and fully tested parts. They may have traces from use, but they are 
electrically and mechanically equivalent to new modules. 

Your Rohde & Schwarz representative will be happy to inform you about which modules are available as 
refurbished modules. 

Taking Back Defective Replaced Modules 

Defective modules of the replacement program which cannot be repaired are taken back within three 
months following delivery. A repurchasing value is credited. 

Excluded are parts which cannot be repaired, e.g. printed boards that are burnt, broken or damaged by 
attempts to repair them, incomplete modules, and parts with severe mechanical damage. 

Please return the defective replacement modules, together with the accompanying document for returned 
merchandise, which you received with the spare module. We need the following information: 

●

  Stock number, serial number and designation of the removed part 

●

  Detailed error description 

●

  Stock number, serial number and type of instrument from which the module was removed 

●

  Date of removal 

●

  Name of the engineer/technician who replaced the module 

●

  R&S ordering number 

●

  Service reference number (if available) 

 

Summary of Contents for ZVB 14







































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands