Machine Overview
R&S
®
TS7124AS
20
Instructions Handbook 1179.2948.02 ─ 01
4.3
Push-Button Switch Unit
The push-button switch unit is an optional manual control device for opening and clos-
ing the chamber at the push of a button, as described in
The R&S
TS-F24SB1 (order no. 1525.8712.03) has a
non-latching
push-button
switch:
Figure 4-4: Push-button switch unit with cable and connector
The switch unit connects to the 25-pin D-Sub connector [X21] in the control array on
the rear side of the chamber (labeled 3 in
).
Table 4-1: Push-button switch unit specifications
Parameter
Value
Connector type
D-Sub 25 pins, female
Cable length
2 m
Switch unit dimensions
(W x D x H)
72 mm x 80 mm x 56 mm
For EMC reasons, the length of the switch unit's cable is limited to a maximum of 2
m.
The push-button switch unit is not a serviceable part. If it is defective or not working
correctly, replace it.
Push-Button Switch Unit
