Instrument Control
R&S
®
SMB100A
80
Quick Start Guide 1407.0812.62 ─ 20
A window with a progress indicates that the instrument performs an extended calcula-
tion that requires longer calculation time. The termination of such a calculation restores
the previous values.
► Press the [Abort] button to terminate the calculation.
All previous values are restored.
8.1.6
Editors
The R&S
SMB provides user-friendly editors for defining lists. Lists containing fre-
quency and level value pairs are used for the list mode and the user-defined level cor-
rection.
The lists are saved to files and may thus have any length. The file name of the lists and
the directory to which the files are saved are user-selectable. The file prefix is different
for each list type and is permanently assigned by the system.
For information about file handling and overview of the automatically assigned file pre-
fixes, refer to
Chapter 8.1.8, "File Management"
8.1.6.1
Working with List Editor
The "User Correction" and "List Mode" dialogs provide a list editor for defining the fre-
quency/level value pairs.
Editing list mode data lists
1. To access a list editor and open an existing data list for editing, use the cursor keys
to select the associated button "Edit User Correction Data..." or "Edit List Mode
Data..." (if available) in the individual menu.
The selected list is displayed and the cursor marks the first row of the
"Frequency/Hz" column.
If no list has been selected, a blank list of only one row is displayed.
2. Press the [Left/Right] arrow keys to change between the colums.
Use the [Up/Down] arrow keys to mark a row.
3. Use the numeric keys to enter the value for the value pairs in the "Frequency/Hz"
and "Power/dBm" table columns. A blank row is inserted at the end of the list.
Terminate the entry by pressing a [Unit] key.
Manual Operation
