manualshive.com logo in svg

Rohde & Schwarz SMB100A, Quick Start Manual

Share
Download
Rohde & Schwarz SMB100A Quick Start Manual Download Page 67

Instrument Control

R&S

®

SMB100A

67

Quick Start Guide 1407.0812.62 ─ 20

An exception are keys that call a menu such as the [MENU] (CTRL+M) key which
opens the complete menu tree of the instrument, the [SETUP] (CTRL+E) key which
opens the menus for general instrument settings or the [FILE] (CTRL+S) key which
opens the menu for file management.

Help functions for user support

Numerous help functions support the user in signal configuration.

●

Value ranges

The valid setting range is displayed for each numeric parameter. This requires a
short wait after activation of the entry field. The range is then displayed automati-
cally after a few seconds.

If the entered value is outside the permissible range, the next permissible value is
automatically set and a message is output.

●

Context-sensitive help

Context-sensitive help for each parameter can be called with the [HELP] or [F1]
key.

●

Comprehensive online help

Each help page is part of a comprehensive online help function which can be
called by means of an index, a content tree or the "Previous/Next" buttons.

Info line with messages for indication of the current instrument state

A great variety of different messages such as status messages, error messages, warn-
ings or information are displayed in the header field of the screen. With the aid of the
[INFO] (CTRL+I) key, help pages can be called for most of the messages. They pro-
vide background information on the message and indicate operating steps that may be
required. All messages are explained in the online help which can be called with the
[HELP] (F1) key.

8.1.3

 

Display

The display shows the current signal generator state and offers graphical elements for
direct operation. It is divided into three sections:

●

The frequency and level display with info line indicates the main output signal
parameters and reports the current state with status, error and warning messages.

●

The block diagram shows the instrument configuration, the signal characteristic as
well as the inputs and outputs used and permits interactive operation via graphics
elements. Active menus and graphs are displayed on top of the block diagram.

Manual Operation

Summary of Contents for SMB100A





























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands