Signal generation control
R&S
®
SMW-K52/-K116
52
User Manual 1175.6778.02 ─ 19
"Pulse"
A regular marker signal is generated. The pulse frequency is derived
by dividing the sample rate by the selected divider.
Remote command:
[:SOURce<hw>]:BB:DVB:TRIGger:OUTPut<ch>:PULSe:DIVider
[:SOURce<hw>]:BB:DVB:TRIGger:OUTPut<ch>:PULSe:FREQuency?
"Pattern"
A marker signal that is defined by a bit pattern is generated.
Remote command:
[:SOURce<hw>]:BB:DVB:TRIGger:OUTPut<ch>:PATTern
"On/Off Ratio"
A regular marker signal that is defined by an on/off ratio is generated.
A period lasts one on-cycle and one off-cycle.
Remote command:
[:SOURce<hw>]:BB:DVB:TRIGger:OUTPut<ch>:ONTime
[:SOURce<hw>]:BB:DVB:TRIGger:OUTPut<ch>:OFFTime
Remote command:
[:SOURce<hw>]:BB:DVB:TRIGger:OUTPut<ch>:MODE
Marker x Delay
Delays the marker signal at the marker output relative to the signal generation start.
Variation of the parameter "Marker x Delay" causes signal recalculation.
Remote command:
[:SOURce<hw>]:BB:DVB:TRIGger:OUTPut<ch>:DELay
4.4
Clock settings
Access:
► Select "Baseband > DVB > Clock".
The dialog provides settings to select and configure the clock signal, like the clock
source and clock mode.
Clock settings