manualshive.com logo in svg

Rohde & Schwarz R&S SMW-K116 DVB-S2/S2X, User Manual

Share
Download
Rohde & Schwarz R&S SMW-K116 DVB-S2/S2X User Manual Download Page 55

Remote-control commands

R&S

®

SMW-K52/-K116

55

User Manual 1175.6778.02 ─ 19

5

 

Remote-control commands

The following commands are required to perform signal generation with the DVB
options in a remote environment. We assume that the R&S

 

SMW has already been set

up for remote operation in a network as described in the R&S

 

SMW documentation. A

knowledge about the remote control operation and the SCPI command syntax is
assumed.

Conventions used in SCPI command descriptions

For a description of the conventions used in the remote command descriptions, see
section "Remote Control Commands" in the R&S

 

SMW user manual.

Common suffixes

The following common suffixes are used in remote commands:

Suffix

Value range

Description

ENTity<ch>

1 to 4

Entity in a multiple entity configuration with separate base-
band sources

ENTity3|4

 require option R&S

 

SMW-K76

SOURce<hw>

[1] to 4

Available baseband signals

Only 

:SOURce1

 possible, if the keyword 

ENTity

 is used.

OUTPut<ch>

1 to 3

Available markers

SET<st>

1 to 100

MODCOD set

Using SCPI command aliases for advanced mode with multiple entities

You can address multiple entities configurations by using the SCPI commands starting
with the keyword 

:SOURce

 or the alias commands starting with the keyword 

ENTity

.

Note that the meaning of the keyword 

:SOURce<hw>

 changes in the second case.

For details, see section "SCPI Command Aliases for Advanced Mode with Multiple
Entities" in the R&S

 

SMW user manual.

Programming examples

This description provides simple programming examples. The purpose of the examples
is to present 

all

 commands for a given task. In real applications, one would rather

reduce the examples to an appropriate subset of commands.

The programming examples have been tested with a software tool which provides an
environment for the development and execution of remote tests. To keep the example
as simple as possible, only the "clean" SCPI syntax elements are reported. Non-exe-
cutable command lines (e.g. comments) start with two // characters.

At the beginning of the most remote control program, an instrument preset or reset is
recommended to set the instrument to a definite state. The commands 

*RST

 and

Summary of Contents for R&S SMW-K116 DVB-S2/S2X











































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands