Rohde & Schwarz R&S RT-ZM130, User Manual

Page: 9 / 39

Product Description
R&S
®
RT
‑
ZM
9 User Manual 1419.3128.02 ─ 04
(1) Positive coaxial input
(2) Negative coaxial input
(3) Ground socket
(4) Termination voltage socket
(5) Micro button
Signal and Termination voltage sockets are
compatible with 0.64 mm (25 mil) square pins
and 0.6 mm to 0.8 mm (24 mil to 35mil) round
pins.
1.3.2 Probe Box
The probe box connects the probe and the oscilloscope via the Rohde & Schwarz
probe interface. The Rohde & Schwarz probe interface contains a male precision
7 mm (276 mil) BNC connector and six pogo pin connectors. This interface pro-
vides the required supply voltage and is also used to transmit analog signals and
digital data simultaneously. All the analog voltages required by the probe are gen-
erated in the probe box. This approach ensures that it will be possible to operate
future probes on any base unit that features a Rohde
& Schwarz probe interface.
(1) Rohde & Schwarz probe interface with
7 mm (276 mil) coaxial connector and 6 pogo
pins
(2) Release knob
1.3.3 Probe Tip Modules
To use the probe for measurements, select the appropriate probe tip module and
connect it to the probe amplifier.
Figure 1-2 shows all probe tip modules are available for the R&S RT-ZM probe.
The usage of probe tip modules is described in Chapter 3, "Connecting the Probe
to the DUT" , on page 24.
If you need more probe tip modules, you can order them at Rohde & Schwarz.
The order numbers are provided in the data sheet.
Description of the Probe