manualshive.com logo in svg

Rohde & Schwarz R&S RT-ZM130, User Manual

Share
Download
Rohde & Schwarz R&S RT-ZM130 User Manual Download Page 36

Maintenance and Service

R&S

®

RT

‑

ZM

36

User Manual 1419.3128.02 ─ 04

North America

Phone 1-888-TEST-RSA (1-888-837-8772)

[email protected]

Latin America

Phone +1-410-910-7988

[email protected]

Asia/Pacific

Phone +65 65 13 04 88

[email protected]

China

Phone +86-800-810-8228 / +86-400-650-5896

[email protected]

4.3

 

Returning for Servicing

Use the original packaging to return your R&S

 

RT-ZM to your Rohde

 

&

 

Schwarz

service center. A list of all service centers is available on:

www.services.rohde-schwarz.com

If you cannot use the original packaging, consider the following:

1. Use a sufficiently sized box.

2. Protect the product from damage and moisture (e.g. with bubble wrap).

3. Use some kind of protective material (e.g. crumpled newspaper) to stabilize

the product inside the box.

4. Seal the box with tape.

5. Address the package to your nearest Rohde

 

&

 

Schwarz service center.

Returning for Servicing

Summary of Contents for R&S RT-ZM130








































Reviews:

No comments

Brands by name

Popular brands

Load more brands