Putting into Operation
R&S
®
RT
‑
ZM
14
User Manual 1419.3128.02 ─ 04
During usage, the probe slightly heats up. Warming is normal behavior and not a
sign of malfunction.
2.1
Connecting the Probe to the Oscilloscope
1. If your DUT is floating and not grounded, connect the DUT ground to the oscil-
loscope ground before connecting any probe tip module to your DUT.
2. Connect the probe box (1) to the Rohde & Schwarz probe interface of the
oscilloscope (2).
The probe snaps in when connected properly to the port.
Figure 2-1: Connecting the probe to the Rohde
&
Schwarz oscilloscope
► To disconnect the probe:
a) Press and hold the release button (3).
b) Pull the probe box away from the oscilloscope.
Connecting the Probe to the Oscilloscope
