Rohde & Schwarz GB4000V, User Manual

Page: 17 / 70

R&S GB4000V Audio Unit
User Manual 6174.7514.02 - 02 15
If the unit is exposed to climate fluctuations, condensation may occur.
Precipitation of humidity (condensation) on and within the unit may be the cause of
damage or even destruction.
After storage or transport in cold weather or if extreme variations in temperature occur,
the R&S GB4000V must be slowly adapted to the ambient temperature of the
installation site.
With condensation, allow at least 12 hours of temperature adjustment before starting
up.
For storage observe the environmental data specified in chapter
“1.5”
.
2.3 Installation
The sequence of installation and cabling depends on the installation site (panel, rack)
and the accessibility of the interfaces when the unit is installed.
For dimensions of the R&S GB4000V refer to the Installation Drawing in
“Appendix”
.
Preparation for installation into a control panel
► Prepare the control panel to accommodate the R&S GB4000V. For dimensions of
the panel cutout refer to
“Figure 3”
and
“Figure 4”
.