Rohde & Schwarz GB4000V, User Manual

Page: 25 / 70

R&S GB4000V Audio Unit
User Manual 6174.7514.02 - 02 23
To connect the power supply use the power supply connector included in the mating
connector set R&S ZF4000V with the Order No. 6148.3444.02.
When preparing the power cable, the following should be observed:
-
Minimum cross-section: 0.2 mm
2
(AWG 24),
maximum cross-section: 2.5 mm
2
(AWG 12)
-
I
max
= 2.5 A
-
Wire stripping length: 7 mm
-
Tightening torque for screws on connector: 0.5 Nm (min.) to 0.6 Nm (max.)
You may also connect a backup power supply. For details on pins to be used refer to
Appendix
“A
Technical Information
”.