Li-ion battery pack and charger
DC Power Supply and Battery Operation
9
Installation Manual 1321.3937.02 ─ 02
3
Li-ion battery pack and charger
With the Li
‑
ion battery pack (option R&S
FSV
‑
B32), together with the DC power
supply (R&S
FSV
‑
B30), the instrument can be operated independently of an AC
power supply. The R&S
FSV
‑
B32 option contains 4 Li
‑
ion rechargeable batteries.
The rechargeable batteries can be charged externally using the R&S
FSV
‑
B34
charger.
3.1
Installing the battery pack
Note the
Chapter 1, "Safety Instructions for Lithium Batteries"
1. Attach the battery pack (7) to the top of the instrument.
a) Place the battery pack on the instrument and push it forward until it locks
into place.
b) Secure the battery pack to the side panels using two knurled screws (8).
Figure 3-1: Installing the battery pack
2.
NOTICE!
Do not connect or disconnect the DC cable while the DC power sup-
ply is on to avoid long-term damage to the cable.
Set the switch on the DC power supply to "0".
3. Connect the DC cable to the battery pack and the DC power supply.
Installing the battery pack
