Li-ion battery pack and charger
DC Power Supply and Battery Operation
10
Installation Manual 1321.3937.02 ─ 02
4. Optionally, attach the cable to the DC power supply with a cable clamp (9).
Figure 3-2: Battery pack and cable with clamp
3.2
Charging the batteries
The R&S
FSV
‑
B34 charger is a standalone charging device which can be used to
charge all four rechargeable batteries of the R&S
FSV
‑
B32 battery pack simulta-
neously.
Charge the battery before using it for the first time. Following a long storage
period, it can be necessary to charge and discharge the battery several times to
reach full capacity. For charging, use the R&S
FSV
‑
B34 charger.
Look up the following details in the data sheet:
●
Charging conditions
●
Recharging interval to avoid deep discharge
1. Unscrew the knurled screws (10) on the front of the battery pack.
2. Open the flap (11).
3. Pull the rechargeable batteries (12) out of the housing by the tab.
Charging the batteries
