Software and Firmware Update
R&S
®
DDF205
65
Getting Started 4073.0187.02 ─ 03
Retrieving the IP address of a R&S
DDF205
It is more convenient to use DHCP with the serial number of the R&S
DDF205.
For example, if the serial number is 100.001-002, the DHCP name will be "rs-
ddf205-100001-002". If DHCP is unavailable, then it is advised to run the
"Update32" tool as explained in:
chapter 4.5, "Changing the IP Address"
on page 69 and assign a static IP address.
4.4.2
Installation Procedure
Execute the Remote Access GUI installer by clicking on
GUI Installation for
Remote Access
on the html menu. Allow access if there are security warnings.
Uninstalling an earlier version of the GUI
If an earlier version of the GUI exists, it must be uninstalled before the installation
of a new GUI can proceed. A dialog will appear first, which requests to uninstall this
earlier version:
Click OK and wait for the uninstall to proceed.
Once uninstall is completed, the installation can go ahead. The first step is to key-
in the IP address and port number of the R&S
DDF205. You can find it under
"Current IP Address" and "Current Port" after opening the "Network Configura-
tion" dialog (SETUP > "Config" > "Network") on the front panel.
If your local network has a DNS server and you know the serial number of the
R&S
DDF205, it can be more convenient to use DHCP with the name under which
the R&S
DDF205is known: for a R&S
DDF205 with serial number e.g. 100001-002
the DHCP name will be: "rs-ddf205-100001-002".
GUI Installation for Remote Access
