manualshive.com logo in svg

Rohde & Schwarz DDF205, Getting Started

Share
Download
Rohde & Schwarz DDF205 Getting Started Download Page 64

Software and Firmware Update

R&S

®

 DDF205

64

Getting Started 4073.0187.02 ─ 03

Updating the DDF205 with front control panel

The DDF205 with front control panel can also be updated using the method
with the Update32 tool. Please take note that this method cannot update the
GUI. This might cause version conflicts between receiver firmware and GUI.
For updating the DDF205 with front control panel, use the method described
in 

​

chapter 4.2, "Receiver Firmware and GUI Update for DDF205 with front

control panel"

, on page 50.

If the R&S

 

DDF205 cannot reboot

Because the Update32 Tool performs its firmware updates over the LAN,
there could be a conflict if another user is running the tool in the same network.
The R&S

 

DDF205 might "hang" after a reboot because the bootloader gets

"trapped" by this Update32 on the network. In such cases the best advise is:
unplug the network cable during boot-up and find out who else is running
Update32 on the corporate network.

4.4

GUI Installation for Remote Access

This section explains how to install the Remote GUI for use on a notebook or desk-
top PC.

Internal installation

If you want to install the GUI on the R&S

 

DDF205, follow the procedure

described in 

​

chapter 4.2, "Receiver Firmware and GUI Update for DDF205

with front control panel"

, on page 50.

4.4.1

Preparations

Required files and accessories

The Remote Access GUI can be retrieved from either one of the locations mentioned
at 

​

"CD-ROM and Downloads"

 on page 50.

 

 

GUI Installation for Remote Access

Summary of Contents for DDF205









































































Reviews:

No comments

Brands by name

Popular brands

Load more brands