manualshive.com logo in svg

Rohde & Schwarz DDF205, Getting Started

Share
Download
Rohde & Schwarz DDF205 Getting Started Download Page 36

Operation

R&S

®

 DDF205

36

Getting Started 4073.0187.02 ─ 03

8. Select the "Run +" softkey to start the frequency scan. The Mode display below

the date and time will change from "FScan Stop" to "FScan" to show that FScan
is running.

9. The RF spectrum and waterfall display are updated as the frequency sweeps

upwards. If "Run -" is selected instead, the frequency will sweep downwards.
Some of the parameters in the panel softkey menu (4 / 5) will be grayed out
when the scan is running. To stop the scan, press the MODE key and select the
"Stop" softkey.

2.3.3

Online Help

All the information from the operating manual can be shown on the display of the
R&S

 

DDF205 after pressing the HELP key (or F1 for users of an external GUI).

This key is used to open the online help system. The "Help Assis-
tant" dialog supplies context-sensitive help, i.e. information related
to the context within which the HELP key is pressed (e.g. if HELP is

pressed while scanning, then scan-related help-pages will appear; if HELP is
pressed while conducting ITU measurements, then ITU-related help-pages will
appear).

 

Graphical User Interface (GUI)

Summary of Contents for DDF205









































































Reviews:

No comments

Brands by name

Popular brands

Load more brands