manualshive.com logo in svg

Rohde & Schwarz DDF205, Getting Started

Share
Download
Rohde & Schwarz DDF205 Getting Started Download Page 49

Software and Firmware Update

R&S

®

 DDF205

49

Getting Started 4073.0187.02 ─ 03

4

Software and Firmware Update

4.1

Retrieve Firmware and GUI Versions

The following key sequence allows to retrieve the various firmware revisions of the
R&S

 

DDF205.

The "Firmware Version" refers to the version of the firmware which runs on the main
processor board. It provides the main control functions of the receiver.

The “GUI Version” refers to the GUI software in use:

●

If the menu is obtained from the DDF205 with front control panel, it refers to the
Front Panel GUI.

●

If the menu is obtained from Remote Access, it refers to the Remote Access
GUI.

The GUI software runs on its own processor on the frontpanel hardware. This pro-
cessor is different from the one on the main processor board and has its own oper-
ating system, which is different from the receiver firmware.

The "DSP Version" and "FPGA Version" are part of the firmware image and cannot
be updated separately.

 

 

Retrieve Firmware and GUI Versions

Summary of Contents for DDF205









































































Reviews:

No comments

Brands by name

Popular brands

Load more brands