R&S AM300
Arbitrary and Function Generator
Operating manual, 02/2005
6-111
E-1007.9922.12
Setting the sample
frequency
In "Sample Accurate" Arbitrary mode you can define the sample frequency.
1.
In the
submenu
press the
function key
.
An entry field containing the current setting is displayed. The default
setting is 100 MHz.
2.
Enter a new value ( 5-55).
The permissible entry range for the transmission rate is:
10 µHz
≤
sample freq
≤
100 MHz in 10 µHz steps
Display
The new setting is stored and then displayed in the diagram area. The
divisions of the time axis (grid lines) change in accordance with the
sample frequency setting.
The currently applicable sample frequency is displayed in the parameter
field below the channel name CH1, e.g. "S-Freq: 20 MHz".
Summary of Contents for AM 300
Page 2: ...02 2005 ...
