Rohde & Schwarz 1440.8002.02, Getting Started

Page: 65 / 95

Trying out the instrument
R&S
®
SMM100A
65 Getting Started 1179.1335.02 ─ 04
WCDMA, EUTRA/LTE or WLAN, to name a few. This example uses the digital
standard EUTRA/LTE to introduce the way you can access and interact with the
instrument and experience the advantages provided by the additional options.
The minimum requirement for R&S SMM100A in this example is a base unit
equipped with:
●
Option baseband generator R&S SMM-B9
●
Option EUTRA/LTE R&S SMM-K55
●
Option frequency R&S SMM-B1006
To generate a downlink test signal
The main focus of the following example is not on the R&S SMM100A capabilities
and the features provided by the firmware option. The example aims rather to
help you get familiar with the settings and configuration principle common for the
digital standards.
We use one of the provided EUTRA test models (E-TM) to show how to generate
a test signal upon a quick selection.
1. On the R&S SMM100A front panel, press the Preset key to start out in a
defined instrument configuration.
2. In the block diagram, select "Baseband > Beyond 3G Standards > EUTRA/
LTE".
The EUTRA/LTE dialog appears and displays the general settings provided for
the digital standard.
Generating an EUTRA/LTE signal