Rohde & Schwarz 1440.8002.02, Getting Started

Page: 35 / 95

Instrument tour
R&S
®
SMM100A
35 Getting Started 1179.1335.02 ─ 04
Table 4-5: Display keys
Display key Assigned functions
[Next window] Toggles between the active dialogs
[Resize window] Adjusts the size of the active dialog to use the whole height of
the display.
[Esc] Closes all kinds of dialog boxes, if the edit mode is not active.
Quits the edit mode, if the edit mode is active. In dialog boxes
that contain a "Cancel" button it activates that button.
For "Edit" dialog boxes the following mechanism is used:
●
If data entry has been started, it retains the original value
and closes the dialog box.
●
If data entry has not been started or has been completed, it
closes the dialog box.
4.1.3 Connectors
The RF connector and various others interface connectors are on the front panel.
I/Q
BNC connectors for input of external I/Q signals for analog modulation. The sig-
nals are fed directly into the I/Q modulator.
RF
Output of the RF signal.
The connector type depends on the maximum frequency f
max
, see table below.
Table 4-6: RF connector types of the frequency options
Installed RF frequency
option
Connector type Frequency range
R&S SMM-B1003/-
B1006/-B1007
N female f
max
≤
7.5 GHz
R&S SMM-B1012/-
B1020/-B1031
PC 2.92 mm female
Instrument equipped with interchangeable
PC 2.92 mm test port adapter.
f
max
≤
40 GHz
R&S SMM-B1044/-
B1044N
PC 1.85 mm female
Instrument equipped with PC 1.85 mm inter-
changeable female/female wear and tear
adapter.
f
max
≤
44 GHz
Note: The PC 1.85 mm male connector for up to 44 GHz comes with a protective
1.85 mm female adapter to prevent the sensitive connector from damage.
Front panel tour