Rohde & Schwarz 1424.7805.02, User Manual

Page: 319 / 522

Remote Control Commands
R&S
®
NRX
319 User Manual 1178.5566.02 ─ 08
[SENSe<Sensor>:]FUNCtion:STATe? <function>
Requires the sensor interface for R&S NRT (R&S NRX-B9).
Queries whether the measurement function is enabled or disabled.
Suffix:
<Sensor>
.
101
R&S NRT directional power sensor
Query parameters:
<function> See
CALCulate<Measurement>[:CHANnel<Channel>]:
FEED<Channel>
on page 267.
Usage: Query only
[SENSe<Sensor>:]POWer:REFLection:RANGe:AUTO <state>
[SENSe<Sensor>:]POWer[:POWer]:RANGe:AUTO <state>
If enabled, adapts the scaling of the graphical display once.
Suffix:
<Sensor>
.
1 to 128
Configured sensor connected at: port A = 1, ... , port D = 4, R&S
NRX-B9 = 101, USB and LAN port = 5 to 100
Parameters:
<state> ON | OFF
*RST:
ON
Manual operation: See "Autoscale" on page 112
[SENSe<Sensor>:]POWer:REFLection:RANGe:LIMit:DETect <value>
[SENSe<Sensor>:]POWer[:POWer]:RANGe:LIMit:DETect <value>
Effective if the Out 1 / Trig Out connector is configured as monitoring output for the
power indication, for example using
[SENSe<Sensor>:]POWer[:POWer]:RANGe:
LIMit[:STATe] ON
.
Defines when a logic high level (> 2.7 V) is output at the Out 1 / Trig Out connector.
Suffix:
<Sensor>
.
1 to 128
Configured sensor connected at: port A = 1, ... , port D = 4, R&S
NRX-B9 = 101, USB and LAN port = 5 to 100
Parameters:
<value> INBound | OUTBound | HIGH
INBound
Measured power is within the range specified.
OUTBound
Measured power is out of the range defined.
Measurement Settings and Results
www.allice.de Allice Messtechnik GmbH