Rohde & Schwarz 1424.7805.02, User Manual

Page: 114 / 522

Sensor Configuration
R&S
®
NRX
114 User Manual 1178.5566.02 ─ 08
8 Sensor Configuration
Access: "Measurement Settings" > "Primary Sensor Config" or "Secondary Sensor
Config"
You can define two sensor configurations in parallel, a primary and a secondary sensor
configuration. To these configurations, you can assign a sensor that is connected to
one of the sensor ports of the R&S NRX. These sensors are called primary sensor and
secondary sensor.
Further information:
●
"Primary Sensor, Secondary Sensor" on page 68
●
Chapter 7, "Measurement Types and Result Displays" , on page 71
●
Chapter 14.8.6, "Standardized Signals" , on page 346
● Mode Settings ....................................................................................................... 114
● Correction Settings ................................................................................................118
● Filter Settings ........................................................................................................ 121
● Range Settings ......................................................................................................125
● NRT Measurement Type ....................................................................................... 127
8.1 Mode Settings
Access:
"Measurement Settings" > "Primary Sensor Config" > "Mode"
"Measurement Settings" > "Secondary Sensor Config" > "Mode"
Available for all measurement types.
Mode Settings
www.allice.de Allice Messtechnik GmbH