Preparing for use
R&S
®
AMN6500
20
User Manual 1352.1213.02 ─ 01
1 = Metal wall, at least 2 m x 2 m
2 = Equipment under test
3 = Cable in folded configuration
4 = Two-Line V-Network
5 = Shielded connection cable
6 = Test receiver
B = Reference ground connection
M = Test receiver connector
P = Test device connector
Devices under test that have a separate ground connection and are not connected by
integral grounding conductors are grounded using an additional connection cable. This
is inserted into the ground connector (1) to the right of the test device socket and runs
parallel to the mains cable.
Measurement setup
