Instrument tour
R&S
®
AMN6500
12
User Manual 1352.1213.02 ─ 01
RF output connector (11)
The "RF Output" socket is the RFI voltage measurement output for connecting the test
receiver. The RFI voltage spectrum of the selected path is attenuated at the "RF Out-
put" by 10 dB. The 10-dB-attenuator and a transient suppressor are permanently inser-
ted. A 150-kHz-highpass filter can also be switched into the path either manually or by
remote control. The socket is an "N" type.
The output impedance is 50
Ω
.
3.2
Rear panel tour
1
2
3
4
5
1 = Remote control connector
2 = Protective grounding bolt
3 = Mains connection cable
4 = Reference ground rail
5 = External power supply socket
Remote control connector (1)
Remote control port. This connection is used to enable remote control of measurement
path "L1" or "N" and the "150 kHz HP" integral filter. See also
Protective ground connection (2)
The connection, a 6-mm-threaded bolt with nut is used only for protective grounding. It
is not suitable for use as a reference ground.
Rear panel tour
