manualshive.com logo in svg

Rohde & Schwarz 1322.8003K06, Getting Started

Share
Download
Rohde & Schwarz 1322.8003K06 Getting Started Download Page 65

Operating the Instrument

R&S

®

FSPN

65

Getting Started 1179.4370.02 ─ 01

The context menu provides easy access to various parameters to set up the
measurement.

6.1.6

 

Frequency Information in Diagram Footer

Graphical result displays contain information in the diagram footer. The informa-
tion (beneath the diagram) depends on the result display.

The contents depend on the application and the result display.

Label

Information

Start offset

Start offset frequency

Stop offset

Stop offset frequency

6.1.7

 

Instrument and Status Information

Global instrument settings and functions, the instrument status and any irregulari-
ties are indicated in the status bar beneath the diagram.

In the MultiView tab the status bar always displays the information for the cur-
rently selected measurement.

The following information is displayed:

Instrument status

The state of the DC Power features.

●

white label = DC Power has been turned off

●

green label = DC Power has been turned on and is within the
defined limits

●

red label = DC Power has been turned on and violates the defined
limits

The R&S

 

FSPN is configured for operation with an external reference.

Progress

The status of the current operation is displayed in the status bar. This includes the
remaining measurement time for measurements that last longer than 1

 

second.

Understanding the Display Information

Summary of Contents for 1322.8003K06






















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands